CNC Video Gallery | Fabertec Group UK

Welcome to our Video Gallery! Explore a range of videos showcasing our capability of our machines, technology, behind-the-scenes moments, special announcements, highlights from exhibitions etc. For more updates, be sure to follow us on social media!

Fabertec Fiber Laser Videos

New fabertec Fiber Lasers, 5-Axis Routers & Secret Products coming to uk

FABERTEC FL2 1325 FIBER LASER 2kW IPG GERMAN SOURCE 3mm BRASS CUTTING

Fabertec FL2 Fiber Laser cutting 0.5 Galv Sheet with Air

Fabertec FL2 1325 2kw Fiber Laser Cutting 10mm Mild Steel

Fabertec FL2 1325 2kw Fiber Laser Cutting 2mm Stainless Steel

Behind the Scenes at Fabertec

NARROW WORKSHOP ENTRANCE? NOT A PROBLEM FOR FABERTEC

We strive to accommodate our clients, though sometimes the situation may not be ideal.

For the Fabertec M1 and M2 2030 CNC center routers:

After removing the gantry, the minimum dimensions required for the table are 232 cm in width and 225 cm in height.
With the gantry assembled, the minimum required dimensions are 280 cm in width and 225 cm in height, without the servo motors and covers on those two models.

An additional charge will apply, as the machines from Fabertec HQ arrive fully tested and assembled. Therefore, reassembly is required on-site, often necessitating the deployment of additional engineers.

how to enter a cnc router machine to a workshop if the main entrance is small

Interested? Check the short clip showing the preparation and final installation.

Here’s a recent experience we had with one of our clients.

We recently had a client in Bradford who showed an interest in our M2 2030 CNC router machine. However, the main challenge we had was the narrow passage to their workshop, which made it hard to get the machine inside. So, the Fabertec team designed and welded 2 metal vertical frames; one for the bed and another one for the gantry to be able to move parts safely through a narrow entrance to the Client's workshop. Led by Charles, the team of Fabertec engineers safely moved the disassembled CNC into its final resting place. The rest of the day was well spent on assembly and the following day M2 2030 was fully assembled and ready for training. After a few hours, the team at Carlise was cutting their designs fully confident in drawing and creating G-Code files. With Fabertec we design machines with the Client in mind - there is no need for PHD or Engineering degree to use our cnc's.

Here at FABERTEC, we are not shy from the challenge and we are making sure you have the means to cut quickly, safely, and accurately.